The recycling system of the cup printing machine saves the slurry and reduces the water consumption for cleaning

In this system, a sheet roller shutter valve is installed at each printing cup position, which can be automatically inserted between the screen and the guide belt together with the auxiliary components during operation. When changing the round mesh and scraper pair, the slurry can be prevented from falling on the fabric and guide belt. When the valve is opened, the valve sheet enters the storage box at the bottom of the cup printer, and the overflowing slurry will be scraped off. After one cup batch is finished, the sheet roller shutter valve under another new pattern is reopened. Thus, the cup printing process can be restarted immediately, which saves time and improves the utilization rate of the machine.

The slurry of cup printing machine is generally wasted. There are also some measures in this regard, such as the company's slurry recovery system. It uses a special pump to pump the slurry remaining in the slurry pipe from the slurry pipe to the net pressure back to the slurry barrel through a rubber ball. Not only the slurry is greatly saved, but also the water consumption for cleaning is correspondingly reduced. The pulp pipe is made of high-strength carbon fiber, with high strength and light weight. The pulp pipe with 2800ram gate width weighs only 6k9, equivalent to 1/4 of conventional materials.