Introduction to the manufacturer of paper cup packaging machine: national standard for disposable paper cup

Introduction to the manufacturer of paper cup packaging machine: the national standard for paper cup issued by the General Administration of quality supervision, inspection and quarantine and the national standards committee will be officially implemented. The disposable paper cup shall meet the following standards: no pattern shall be printed within 15mm of the cup mouth

Previously, disposable paper cups had only industry standards and lacked national standards. The national standard (gb/t 27590-2011) puts forward higher requirements for raw materials, additives, packaging and printing of paper cups to protect consumers. Introduction to the manufacturer of the paper cup packaging machine: the concern is to put forward the requirements for the printing position. It is stipulated that the printing pattern outside the paper cup should have clear outline, uniform color and no obvious color spots, but & Ldquo; No printing is allowed within 15mm from the cup mouth to the cup body and within 10mm from the cup bottom to the cup body & Rdquo;. Introduction to the manufacturer of paper cup packaging machine: & Ldquo; No printing at the mouth of the cup is to protect consumers& Amp; Rdquo; Dongjinshi, executive vice president and Secretary General of the International Food Packaging Association, said that at present, there is no concept of food ink in China, and there is no printing ink that can be used to contact food. When drinking water, the lips touch the mouth of the cup, and the ink in the printed pattern may be ingested, especially the ink containing benzene is more harmful to health. At the same time, when the cup is set, there is a printed pattern at the bottom of the cup, which is also easy to rub the color onto the inner wall of another cup, so the bottom is also required not to be printed. The fluorescent brightener cannot be added artificially to the paper cup packaging machine manufacturer's introduction: in order to avoid the generation of toxic solvents in the raw materials for making paper cups, the national standard stipulates that the paper cups should not have peculiar smell and should not use recycled materials. The additives used in the raw materials should comply with the provisions of the executive standard. The fluorescent brightener, industrial paraffin, industrial talcum powder and other additives not within the scope of GB 9685 cannot be used in the production and processing of paper cups. Introduction to the manufacturer of the paper cup packaging machine: in addition, the standard also has provisions on the stiffness and permeability of the paper cup. The bottom and sides of the paper cup should be free of water leakage. If the paper cup is too soft, it will not meet the standard. All packaging materials of the paper cup shall have sufficient tightness and firmness, and the paper cup packaging shall be dust-proof, moisture-proof and mould proof.