Small details of cup printing machine maintenance

Small details about the maintenance of the cup printer:

Since the occurrence of wear, fatigue, corrosion, aging and other processes is closely related to time, the occurrence of cup printing machine fault is mostly related to time. Most failures may be tested and monitored by instruments in advance. The probability of failure is related to the running time of the machinery. The longer the machinery is used, the greater the probability of failure. The gradual occurrence of faults makes most mechanical faults preventable. Fault diagnosis and condition based maintenance are based on this.

Proper and reasonable maintenance of the cup printing machine periodically can prevent the failure of the cup printing machine or reduce the probability of failure.

Proper and reasonable maintenance of the cup printing machine periodically can prevent the failure of the cup printing machine or reduce the probability of failure. Forget that the wear, corrosion, fatigue, aging and other processes of the cup printing machine are accompanied by changes in energy and quality, and the process is irreversible. It shows that the degree of mechanical aging is gradually increasing, and there are more and more faults. With the increase of service time, although the removal of local faults can restore the mechanical performance, the fault rate of the cup printing machine is still rising, and new faults will continue to appear. At the same time, the damage is incomplete, and it is impossible to restore the mechanical performance to the state before use. The wear and tear of cup printing machine fault determines the difference of mechanical maintenance level. At the same time, the distribution model of cup printing machine fault can not be simply described by exponential distribution. The cup printing machine will have various damages in use, which will cause the structural parameters of parts to change. When the damage develops to such an extent that the structural parameters of parts exceed the allowable value, the cup printing machine will have potential faults. As there is a certain margin in the design of the cup printing machine, even if the structural parameters of some parts exceed the allowable value, the functional output parameters of the machine are still within the allowable range, that is, the machine has no functional failure. It usually takes a long time to develop from potential fault to functional fault, because the development of damage can be slowed down and the potential fault can be controlled to a certain extent by means of lubrication, cleaning, fastening and adjustment.